msds of KINETIN

- Apr 19, 2018 -

1 Identification of substance

Product details

Trade name: KINETIN

Application of the substance/the preparation: plant growth regulator

Manufacturer/Supplier:

PANPAN INDUSTRY CO., LIMITED

Add: NO.62 Zhengtong Road, Zhengzhou, Henan Province, China

Tel: 0086-371-60383117

Fax:0086-371-86231117



2 Composition / Data on components

Chemical name: N-(2-furanylmethyl)-1H-Purin-6-amine

Chemical Formular: C10H9N5O

Relative molecular weight : 215.21

Content: 99%(w/w)min

 

3 Hazards identification

Emergency Overview: Pure white scaly crystal, it is a light eye irritant and skin non-irritant.

Additional information: Refer to section 11 on toxicity

 

4 First aid measures

General information: instantly remove any clothing soiled by the product.

After inhalation:Supply fresh air or oxygen, call for doctor. In case of unconsciousness bring patient into stable side position for transport.

After skin contact: Instantly rinse with plenty of water. Seek medical treatment.

After eye contact: Rinse opened eyes for several minutes under running water. Then consult doctor.

After swallowing: Rinse out mouth and then drink plenty of water. Do not induce vomiting. Call a doctor immediately.

 

5 Fire fighting measures

Suitable extinguishing agents: water, carbon dioxide, dry chemical powder, or appropriate foam

Special hazards caused by the material, its products of combustion or flue gases: Formation of toxic gases is possible during heating or in case of fire. Carbon oxides, nitrogen oxides

Protective equipment: wear self-contained breathing apparatus.

 

6 Accidental release measures

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.

Measures for environmental protection: Do not allow to enter the ground/soil.

                                                                   Do not allow to enter drainage system, surface or ground water.

                                                                   If material reaches soil, water bodies or sewage system inform authorities responsible for such cases.

                                                                   Do not allow product to reach sewage system, water bodies, ground or soil.

Measures for cleaning/collecting:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose of contaminated material as waste according to item 13.

Additional information: See section 13 for information on disposal.

 

7 Handing and storage:

Handing

Information for safe handing: Ensure good ventilation/exhaustion at the workplace. Open and handle container with care. Information about protection against explosions and fires: moderate fire hazard when exposed to heat or flames, keep away from source of ignition-no smoking. Keep away from heating.

Storage

Requirements to be met by storerooms and containers:Provide acid-resistant containers.

Information about storage in one common storage facility:Do not store together with strong bases, oxidizing and color agents.

Further information about storage conditions:Keep container tightly sealed. The stability which noticed on the label is only duty by right storage of the product.


8 Exposure controls and personal protection

Components with critical values that require monitoring at the workplace: not available.

Additional information: not available. Personal protective equipment

General protective and hygienic measures:Keep away from foodstuffs, beverages and food. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. Do not eat or drink while working. Use skin protection cream for preventive skin protection.  

Breathing equipment:  Use breathing protection in case of insufficient ventilation. In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.

Protection of hands: compatible chemical-resistant glove

Material of gloves

Natural rubber, NR  Neoprene gloves  PVC gloves

 Penetration time of glove material The exact break trough time has to be found out by manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 374 part Ⅲ are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.

 Eye protection: safety glasses

Body protection: Protective work clothing


9 Physical and chemical properties

General information

Form:            crystal

Color:            white

Change in condition

Melting point/Melting rang: 269~271℃(sealing)

Boiling range: not applicable

Flash point: not applicable

Density at 20℃: not available

Solubility:acid soluble in dilute alkali, insoluble in water, alcohol, ether and acetone .

PH-value at 20 ℃(5solution): 4.1±0.1

 

10 Stability and reactivity

Thermal decomposition / conditions to be avoided:No decomposition if used and stored according to specifications.

Materials to be avoided: incompatible with strong bases, oxidizing and color agents.Reacts with strong bases, oxidizing and color agents.

Dangerous products of composition: none


11Toxicological information

Acute toxicity

LD / LC50 values that are relevant for classification: oral LD50 >5000mg/kg (mouse) for cell kinetin solution.

Primary irritant effect:

On the skin: no corrosive effect on skin.

On the eyes: extremly slight corrosive effect.

Sensitization: no sensitizing effect.

Not seen tasted toxicology data, because it is reported the microbial, plants contained inside the body, safe to human and livestock


12 Ecological  information

Mobility: completely soluble

Biodegradation: not available

Bioaccumulation: not available

Additional ecological information:AOX-indication: the product does not contain organically bonded halogen compounds.

  

13 Disposal considerations:

Product:

Recommendation: must be specially treated under adherence to official regulations.

Waste disposal key number:The mentioned waste codes are recommendations based on the product application as suggested by the manufacturer. Special applications and special disposal conditions at the applier’s place may however require another waste code.

Uncleaned packagings:

Recommendation:

Disposal must be made according to official regulations.

Non contaminated packagings can be treated like household garbage.

Recommended cleaning agent: water, if necessary with cleaning agent.


14 Transport information:

Not regulated.

Not classified as dangerous.


15 Regulatory information

Designation according to EC guidelines:The product has been classified and labeled in accordance with EC Directives/Ordinance on Hazardous Materials.

Risk phrases:Harmful if swallowed.

Safety phrases:When using do not eat or drink. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Wear suitable protective clothing, gloves and eyes/face protection.

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). his material and its container must be disposed of adherence to official regulations.

National regulations

Technical instructions (air):

Water hazard class: Water hazard class 1 (Self-assessment): no hazardous for water

 

16 Other information:

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.


Previous: The Short Introduction about Cephalosporins Next: MSDS of 3-Indoleacetic Acid

Related Industry Knowledge

Related Products

  • CAS15318-45-3 Pharmaceutical Grade Raw Material Antibiotic Medicine Thiamphenicol Powder
  • FENBENDAZOLE, Anthelmintic For Veterinary Use In CATTLE, SHEEP, GOATS, PIG, POULTRY, HORSES, DOGS And CATS Against Roundworms And Tapeworms
  • Water Soluble 4-Chlorophenoxyacetic Acid Sodium Salt Plant Growth Regulator 4-CPA Sodium Salt 4-CPA Na
  • Plant Growth Regulator Hormone Diethyl Amimoethyl Hexanote DA-6 98% TC With Wide Application
  • Insecticide Emamectin benzoate 95%TC, 90%TC, 70%TC,5%WDG, 30%WDG
  • Insecticide Fipronil Termites Pest Control 97%TC, 80%WDG